It should be mounted on a rigid vertical surface, ideally at eye level for easy monitoring.
The OMD-11 uses a light-scattering measurement principle to detect oil droplets in a sample stream. Key technical highlights from the Solids Suppression deckma omd11 manual
: The manual mandates installing the monitor as close as possible to the oily water separator. The distance must not exceed 8 metres to ensure a response time under 20 seconds, as required by IMO regulations. It should be mounted on a rigid vertical
Here’s a helpful, practical review of the — based on common user feedback and technical documentation standards. The distance must not exceed 8 metres to
To fully appreciate the OMD-11 manual, one must understand its evolution. The predecessor, the OMD-2, was a purely pneumatic system using a rotating disc and measuring tube. While effective, it was prone to clogging and mechanical wear.
to meet international maritime standards for 15 ppm bilge alarms, specifically IMO Resolution MEPC.60 (33)
It must be placed as close as possible to the oily water separator. The distance must never exceed 8 meters to ensure a response time under 20 seconds, as required by IMO regulations.