Driverack 260 Updater V1.61 [extra Quality] Info

: Power cycle the unit again to verify the startup screen now shows v1.61. Why Use v1.61?

First, let’s clear up a common misconception. The “Updater” is the same as the “DriveRack 260 Software” (the GUI control application). driverack 260 updater v1.61

: If your unit is already running v1.61, do not downgrade to v1.60, as this creates a hardware mismatch. : Power cycle the unit again to verify

The unit will reboot automatically. You will see a progress bar on both your PC screen and the DriveRack’s LCD. This takes approximately 90 seconds. Do not power off the unit during this time. The “Updater” is the same as the “DriveRack

Because the DriveRack 260 is often installed in fixed locations—bolted into racks in church ceilings, backstage at theaters, or in the locked IT closets of stadiums—access to its physical front panel is frequently limited. Therefore, the relationship between the hardware and the PC-based control software is symbiotic. The hardware processes the audio, but the software is the only practical way to configure it. This is where the Updater utility becomes indispensable.