Ka 54 Remsl Top !!hot!!

| Parameter | Typical Value / Range | | :--- | :--- | | | Pneumatic rotary clamp or linear actuator with guidance | | Bore Diameter | 54 mm (standardized within the KA family) | | Stroke Length | Available in 25, 50, 75, 100 mm options – custom lengths on request | | Operating Pressure | 2 to 10 bar (pneumatic) / up to 160 bar (hydraulic variants) | | Operating Temperature | -20°C to +80°C (standard seals); TOP grade: -30°C to +150°C with FKM/Viton seals | | Mounting Style | Flange (front/rear), foot mounting, or threaded nose – configurable | | Material (Body) | Hard-anodized aluminum alloy AW-6060 T6 (standard); TOP grade: Nickel-plated ductile iron | | Seal Material | NBR (standard); TOP grade: FKM / PTFE composite for chemical resistance | | Max. Clamping Force | 2.5 kN (pneumatic) / 12 kN (hydraulic) | | Repetition Accuracy (TOP) | ±0.02 mm | | Corrosion Protection (REMSL) | Salt spray tested >500 hours per ISO 9227 (due to stainless steel + coating) |

The specification breaks down as follows: ka 54 remsl top

Milestones from birth to Mahaparinibbana. | Parameter | Typical Value / Range |

If “REMSL” is a misspelling of as in “REMSL” standing for “Radar Electro-Magnetic Spectral Limiter,” then KA 54 could be a specific hardware revision. In plastic injection molding, core pullers and ejector

In plastic injection molding, core pullers and ejector systems experience extreme heat and contamination. The high-temperature seal option of the KA 54 REMSL TOP allows it to operate adjacent to molds running at 120°C without hardening or cracking.

The TOP variant includes slots for integrated magnetic reed or Hall-effect sensors. This allows for precise end-stroke feedback without external limit switches, simplifying PLC integration in automated cells.