After 100%, the phone restarts. The first boot may take 3–5 minutes. If stuck at boot logo, perform a hard reset via recovery (Volume Up + Home + Power).
Note: I assume you mean the multiloader tool used for flashing firmware, ROMs, or installing software to embedded devices/Android phones (commonly referenced in communities for Mediatek/Spreadtrum/Qualcomm devices). If you meant a different "multiloader," tell me and I’ll adapt. multiloader v5.67
| Component | File Extension | Description | |-----------|----------------|-------------| | Boot | .boot or .bin | Primary bootloader (dangerous to modify) | | PDA | .pda or .bin | Main operating system (Bada/Windows Mobile) | | Phone | .phone or .bin | Modem/radio firmware | | CSC | .csc | Country/carrier customization | | EFS | .efs | IMEI and device certificates (backup first!) | After 100%, the phone restarts
Download the Samsung USB Driver package (version 1.5.27.0 or older). Install and reboot your PC. Connect your phone in "Download Mode" to verify driver recognition. Note: I assume you mean the multiloader tool
| Tool | Supported Devices | File Format | Risk Level | Best For | | :--- | :--- | :--- | :--- | :--- | | | Samsung Bada, WinMo, RTOS | .bin, .s3 | Medium | Brick recovery, full NAND erase | | Odin 3.x | Samsung Android (2010-2020) | .tar.md5 | Low | Galaxy S, Note, A series | | Octopus Box | All Samsung + other brands | Proprietary | High (commercial) | Professional repair, IMEI repair | | Z3X Samsung Tool | All Samsung | .bin, .tar, .s3 | High | Advanced service functions |
: The tool can help resolve software issues like bootloops, being stuck on the logo, or system file corruption by reinstalling the device's operating system.