Solari Udine Mck 2245 Manuale Work May 2026

| Pin | Signal | Description | |-----|--------|-------------| | 1 | GND | Ground | | 2 | TX/RX+ | Data + (RS485) | | 3 | TX/RX- | Data – (RS485) | | 5 | +5V | For external converter (max 100mA) | | 8 | BUSY | Output (open collector) | | 12 | RESET | Reset line (active low) | | 16-25 | NC | Not connected |

While specific step-by-step programming varies by firmware version, general installation and use are detailed in the MCK Installation Manual provided by . solari udine mck 2245 manuale work

: Manages receiver clocks using polarized pulse lines (monopolar or bipolar) with a maximum load of 24V/1.5A per line. Secure the front cover to lock in the settings

The clock will beep to signal it is programmed. Secure the front cover to lock in the settings. Common Use Cases & "Work" Mode solari udine mck 2245 manuale work