The V2000-C is an RFID access control keypad supporting card, PIN, or combined authentication with a default admin password of 123456 or 1234. Programming involves entering a mode via password to change settings, add users, and configure door security modes. For a complete digital copy, you can find the official V2000-C Access Control Manual on manufacturer download pages like Obohands. RFID Access Control System User Manual - uAmper
Before starting the installation, ensure your power supply and environment match the device requirements: DC 12V ± 10% User Capacity: 2,000 users v2000-c user manual
Print pages 10 (Troubleshooting) and 7 (Advanced Settings) and keep them in your glove box. The V2000-C is an RFID access control keypad
The V2000-C allows you to add users via card, PIN, or a combination of both. Adding Users (Card or PIN) Enter Programming Mode. Press 1 . Swipe the card. For PIN: Enter the 4-digit PIN + # . Press * to exit. Deleting Users Enter Programming Mode. Press 2 . By Card: Swipe the card you wish to delete. By User ID: Enter the User ID Number + # . Press * to exit. 5. Advanced Settings Door Relay Time To adjust how long the door stays unlocked: Enter Programming Mode. Press 4 + (0–99) + # . Example: 4 + 5 + # sets the delay to 5 seconds. Door Open Detection RFID Access Control System User Manual - uAmper
✅ Bookmark this post – it covers 90% of what you’ll ever need for your V2000-C dash cam.