: If you are using a conversion cable (USB-XC), it may require a separate Prolific or CH340 serial-to-USB driver if not automatically installed by Windows. 4. Safety and Connection Tips
. If it says "Connection Successful," you are ready to upload or download code. 💡 Troubleshooting Tips Driver Signature Error: xinje plc usb driver install
: If Windows blocks the install, you may need to disable Driver Signature Enforcement. : If you are using a conversion cable
There’s nothing worse than sitting down at your machine, cable in hand, ready to upload a new program to your Xinje PLC—only to see the dreaded yellow exclamation mark in Device Manager. If you’re using a USB programming cable (often the XVP series or direct USB ports on newer XC/XD/XG models), Windows will not recognize the device automatically. If it says "Connection Successful," you are ready
The driver you need depends on your PLC model and connection method: XD/XL Series: Download and install
Click . If successful, you will see a message like "Connect To PLC Succeeded". Troubleshooting Tips
A: Officially, no. XINJE AutoShop is Windows-only. However, Linux users can sometimes get the USB-to-serial bridge (using the ch341 or ftdi_sio kernel module) to create a COM port, but you cannot run AutoShop without a virtual machine.