Caraflo V200 Shower Instructions ⇒

This valve can be installed either horizontally or vertically , allowing for flexible placement in various shower pod designs.

The most common issue users face is "cycling" water temperatures. Because the V200 relies on your vehicle’s boiler (Truma, Alde, or Whale), follow these steps for a consistent experience: caraflo v200 shower instructions

: The valve includes full anti-scald protection, provided the hot water inlet temperature remains at least 10°C above the outlet temperature. This valve can be installed either horizontally or

In hard water areas, the small nozzles on the V200 can become blocked with limescale. In hard water areas, the small nozzles on

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | Power source issue (dead batteries) or no water supply. | Replace batteries (usually AA inside the control box) or check main water valves. | | Water is too cold | Hot water supply cut off or inlet filters blocked. | Check if the water heater is working. Clean the hot water inlet strainer. | | Temperature fluctuates | Unbalanced water pressure or dirty thermostatic cartridge. | Ensure no other appliances (washing machine/toilet) are using water simultaneously while showering. Clean cartridge. | | LED Display fading | Low battery voltage. | Replace batteries immediately to prevent the valve from sticking in the "open" position. | | Water drips after shut off | Residual water in the pipe. | This is normal for a few seconds. If it persists, the internal solenoid valve may need cleaning or replacement. |