Once the software is open, you must modify "Manufactory" parameters to match your machine's physical specs: Accessing Manufactory Settings : Click on Manufactory . You will need to enter the password "ncstudio" (all lowercase). Motor Parameters Pulse Equivalent mm/pulse for X/Y, for Z) according to your machine's gearing. Start-up Feedrate (typically 300 mm/min) and Max Spindle Speed (typically 24,000 rpm). Mechanical Limits

through the installation directory prompts until the process is complete. 2. Hardware and Driver Setup Hardware Connection

I just finished getting the to work properly, and I wanted to share the steps in case anyone else is struggling with the control setup.

: Power off your computer and insert the NCStudio PCI control card into an available PCI slot on the motherboard.